No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show failover_group general

show failover_group general

Function

The show failover_group general command is used to query the failover groups on the storage system.

Format

show failover_group general [ failover_group_id=? ]

Parameters

Parameter

Description

Value

failover_group_id=? Indicates the ID of the failover group.

The value is an integer between 0 and 8191.

Level

Guest

Usage Guidelines

  • You can use the "show failover_group general" command to query details on all failover groups.
  • You can use the "show failover_group general failover_group_id=?" command to query details on a specific failover group.

Example

  • To query all failover groups, run the following command.

    admin:/>show failover_group general
    Failover Group ID Name Description Group Type 
    ----------------- --------------------- -------------------- ---------- 
    0 System-defined System-FailoverGroup System 
    4097 VLAN-FailoverGroup-1 VLAN-FailoverGroup VLAN 
    4098 VLAN-FailoverGroup-2 VLAN-FailoverGroup VLAN 
    4101 VLAN-FailoverGroup-5 VLAN-FailoverGroup VLAN 
    4102 VLAN-FailoverGroup-6 VLAN-FailoverGroup VLAN 
    4104 VLAN-FailoverGroup-8 VLAN-FailoverGroup VLAN 
    4184 VLAN-FailoverGroup-88 VLAN-FailoverGroup VLAN
  • To query failover group 0, run the following command:

    admin:/>show failover_group general failover_group_id=0
    Failover Group ID : 0 
    Name : System-defined 
    Description : System-FailoverGroup 
    Group Type : System

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Failover Group ID

Indicates the ID of the failover group.

Name

Indicates the name of the failover group.

Description

Indicates descriptions of the failover group.

Group Type

Indicates the type of the failover group.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368567

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next