No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poweroff system

poweroff system

Function

The poweroff system command is used to power off the storage system.Running this command causes service interruption.

Format

poweroff system

Parameters

None

Level

Super administrator

Usage Guidelines

  • Running this command forcibly stops the ongoing services on the storage system, leading to service interruption.
  • Before running this command, stop all the ongoing services on the storage system.
  • This command provides an interactive mode for entering passwords. The password will be displayed behind asterisks.
  • If the number of consecutively entered incorrect passwords reaches 3 within 5 minutes, the current session will be disconnected.

Example

To power off the storage system, run the following command.

admin:/>poweroff system
DANGER: You are about to power off storage system. This operation will interrupt all services on the storage system.
Suggestion: Before performing this operation, stop all services on the system.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Password:******
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 366320

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next