No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change mm_user password

change mm_user password

Function

The change mm_user password command is used to change the password of a machine-machine user.

Format

change mm_user password [ user_name=? ]

Parameters

Parameter

Description

Value

user_name=? User name.

The value consists of 5 to 32 ASCII characters, including digits, letters, and underscores (_), and must start with a letter.

NOTE:
"user_name" must be the user name queried by running the "show mm_user general" command. Otherwise, the command fails to be executed.

Level

Super administrator

Usage Guidelines

  • Run the "change mm_user password" command without parameters to change the login password of machine-machine account "mm_user". Run the "change mm_user password" command with parameters to change the login password of the machine-machine account corresponding to the parameters.
    NOTE:
    For details about how to change the user name of the machine-machine account, see the "change mm_user user_name" command.]
    • The password will be displayed behind asterisks.
    • The password consists of 8 to 16 characters and is case-sensitive.
    • The password must contain special characters including ` ~ ! @ # $ % ^ & * ( ) - _ = + \ | [ { } ] ; :' " , < . > / ? and space.
    • The password must meet password complexity requirements:
      • When "password complex" is set to "Normal", the password must contain at least two of the following three: lowercase character, uppercase character, and number.
      • when "password complex" is set to "High", the password must contain lowercase character, uppercase character, and number.
    • The password must be different from the user name and the username in reversed order.
    • One character must not appear for more than three times consecutively.
    You can use the "change safe_strategy" command to change the password and login policies of a storage system.

Example

  • Change the login password of default machine-machine account "mm_user".

    admin:/>change mm_user password
    New Password:*********
    Reenter password:*********
    Command executed successfully.
  • Change the login password of machine-machine account "mm_user1".

    admin:/>change mm_user password user_name=mm_user1
    New Password:*********
    Reenter password:*********
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 363646

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next