No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change certificate password

change certificate password


The change certificate password command is used to change the password for encrypting the private key of a certificate.


change certificate password type=?





type=? Certificate type.

Possible values are:

"key_management_center": key management center.

"device_management": device management.

"domain_authentication": domain authentication.

"hypermetro_arbitration": hypermetro arbitration.

"https_protocol": https protocol.

"ftps_protocol": ftps protocol.

"syslog_authentication": SYSLOG server authentication.


Usage Guidelines


V3 not support the certificate type of HyperMetro arbitration, HTTPS protocol and FTPS protocol.


Super administrator,vstore admin

Usage Guidelines

  • This command can be used to change the password for encrypting the private key of the certificate in a specific scenario.
  • This command provides an interactive mode for entering passwords. When you are entering a password, nothing is displayed on the screen.
  • By default, the password contains 8 to 16 case-sensitive characters.
  • The password must contain spaces and special characters, including ` ~ ! @ # $ % ^ & * ( ) - _ = + \ | [ { } ] ; :' " , < . > / ?.
  • The password must meet the following complexity requirements:
    • When the password complexity is set to normal, the password must contain at least two of the following types: lowercase characters, uppercase characters, and digits.
    • When the password complexity is set to high, the password must contain lowercase characters, uppercase characters, and digits.
  • The password cannot contain four consecutive same characters.
    The "change safe_strategy" command can be used to change the password policy and login policy of the storage system.


Change the password for encrypting the private key of a certificate.

admin/>change certificate password type=key_management_center
New password:*************
Reenter password:*************
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362539

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next