No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change clone secondary_lun

change clone secondary_lun


The change clone secondary_lun command is used to modify the information on existing secondary logical unit numbers (LUNs) for a clone task, including the synchronization rate and recovery policy.


change clone secondary_lun clone_id=? lun_id=? { synchronization_rate=? | recovery_policy=? } *





clone_id=? ID of a clone task.

To obtain the value, run "show clone general".

lun_id=? ID of a secondary LUN that you want to modify its information.

To obtain the value, run "show clone secondary_lun".

synchronization_rate=? An updated synchronization rate.

The value can be

  • "Low": indicates the low rate.
  • "Middle": indicates the medium rate.
  • "High": indicates the high rate.
  • "Highest": indicates the highest rate.
The default value is "Middle".
recovery_policy=? An updated recovery policy.

The value can be:

  • "manual": indicates manual recovery.
  • "automatic": indicates automatic recovery.
The default value is "automatic".



Usage Guidelines



To modify the information on secondary LUN "2" for plit clone task "2", where the updated recovery policy is automatic and the updated synchronization rate is high.

admin:/>change clone secondary_lun clone_id=2 lun_id=2 recovery_policy=automatic synchronizatio_rate=High
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365160

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next