No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show quota_tree general

show quota_tree general


The show quota_tree general command is used to query information about quota trees in a file system.


show quota_tree general { file_system_id=? | quota_tree_id=? }





file_system_id=? File system ID, used to batch query quota trees.

To obtain the value, run the "show file_system general" command.

quota_tree_id=? Quota tree ID, used to query a specified quota tree. The parameter value is in the format of filesystemID@quotatreeID. The file system ID ranges from 0 to 65535, and the quota tree ID ranges from 0 to 4096.

To obtain the value, run the "show quota_tree general" command.



Usage Guidelines

  • The following parameters are mutually exclusive: "file_system_id" and "quota_tree_id".
  • The "show quota_tree general file_system_id=?" command is used to query all quota trees in a file system.
  • The "show quota_tree general quota_tree_id=?" command is used to query a specified quota tree in a file system.


  • Query all quota trees in file system "0".

    admin:/>show quota_tree general file_system_id=0
    Quota Tree ID Quota Tree Name File System ID Quota Tree Switch
    ------------- --------------- -------------- ------------------
    0@0 Root Quota Tree 0 off
    0@1 qtree0000 0 Off
    0@2 qtree0001 0 Off
    0@3 qtree0002 0 Off
  • Query quota tree "0@1".

    admin:/>show quota_tree general quota_tree_id=0@1
    Quota Tree ID :0@1
    Quota Tree Name :qtree0000
    File System ID :0
    Quota Tree Switch :Off

System Response

The following table describes the parameter meanings.



Quota Tree ID

Quota tree ID.

Quota Tree Name

Name of a quota tree.

File System ID

File system ID.

Quota Tree Switch

Status of the quota tree switch.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 366869

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next