No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change quota_tree general

change quota_tree general

Function

The change quota_tree general command is used to modify information about quota trees in a file system.

Format

change quota_tree general quota_tree_id=? { quota_tree_name=? | quota_switch=? } *

Parameters

Parameter

Description

Value

quota_tree_id=? Quota tree ID. The parameter value is in the format of filesystemID@quotatreeID. The file system ID ranges from 0 to 65535, and the quota tree ID ranges from 0 to 4096.

To obtain the value, run the "show quota_tree general" command.

quota_tree_name=? Quota tree name.

The value contains 1 to 127 characters including digits, letters, and underscores (_).

quota_switch=? Status of the quota switch.

The value can be "on" or "off", where:

  • "on": The switch is turned on.
  • "off": The switch is turned off.

Level

Administrator

Usage Guidelines

Enter at least one of the following parameters: "quota_tree_name" and "quota_switch".

Example

  • Change the name of quota tree "0@1" to "newqtree".

    admin:/>change quota_tree general quota_tree_id=0@1 quota_tree_name=newqtree
    Command executed successfully.
     
  • Disable the quota function of quota tree "0@1".

    admin:/>change quota_tree general quota_tree_id=0@1 quota_switch=off
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361459

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next