No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_pair pause

change hyper_metro_pair pause

Function

The change hyper_metro_pair pause command is used to suspend a HyperMetro pair.

Format

change hyper_metro_pair pause pair_id=? [ stop_role=? ]

Parameters

Parameter

Description

Value

pair_id=? ID of the HyperMetro pair.

To obtain the value, run "show hyper_metro_pair general".

stop_role=? Site whose services you want to stop (When the running status of a HyperMetro pair is "Synchronizing" or "To Be Synchronized", you cannot stop services at the site that uniquely provides host read and write services).

The value can be "Preferred" or "Non-preferred", where:

  • "Preferred": preferred site.
  • "Non-preferred": non-preferred site.

Level

Administrator

Usage Guidelines

None.

Example

Suspending HyperMetro pair "1".

admin:/>change hyper_metro_pair pause pair_id=1
CAUTION: You are going to suspend a HyperMetro pair.
Once a HyperMetro pair is suspended, cross-site real-time data mirroring stops. Member LUNs in the HyperMetro pair can only be accessed unidirectionally.
Suggestion: Before performing this operation, ensure that the storage arrays at the two data centers are connected to hosts properly to prevent service exceptions.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368104

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next