No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change schedule

change schedule

Function

The change schedule command is used to modify the settings associated with a SmartTier policy. SmartTier policies include data relocation and I/O monitoring policies.

Format

change schedule schedule_id=? { name=? | period=? [ day_of_week=? ] | start_time= ? | duration= ? } *

Parameters

Parameter

Description

Value

schedule_id=? ID of a SmartTier policy.

To obtain the value, run "show schedule".

name=? Name of a policy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

period=? Execution period of a policy.

The value can be:

  • "daily": The policy is executed daily.
  • "weekly": The policy is executed weekly.
day_of_week=? The day on which a policy will be cycled weekly. This parameter must be assigned and it is valid only when period=? is set to "weekly".

You can specify multiple days in a week and separate them with commas (,). The value can be "sun", "mon", "tue", "wed", "thu", "fri", or "sat", where:

  • "sun": indicates Sunday.
  • "mon": indicates Monday.
  • "tue": indicates Tuesday.
  • "wed": indicates Wednesday.
  • "thu": indicates Thursday.
  • "fri": indicates Friday.
  • "sat": indicates Saturday.
start_time=? The time from which a policy will be started on a specific day of a week.

The value is in the format of HH:MM. The value ranges from 00:00 to 23:59.

duration=? The duration of the policy execution.

The value is in the format of HH:MM or H:M. The value ranges from 00:30 to 24:00.

Level

Administrator

Usage Guidelines

None

Example

To modify the settings of SmartTier policy "1", where the policy will be renamed "newname", the updated policy execution start time is "08:00", and the policy execution will last for two hours, run the following command:

admin:/>change schedule schedule_id=1 name=newname period=daily start_time=08:00 duration=02:00
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 299504

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next