No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete host

delete host


The delete host command is used to delete hosts.


delete host host_id=?





host_id=? ID of a host.

To obtain the value, run "show host general".



Usage Guidelines

  • Running this command deletes a host from the storage system.
  • Before running this command, ensure that the selected host is exactly the one you want to delete.
  • Before running this command, ensure that the selected host is not in any mapping view. Otherwise, the command execution will fail.
  • Before running this command, ensure that no initiator has been added to the selected host. Otherwise, the command execution will fail.


To delete host "1", run the following command.

admin:/>delete host host_id=1
WARNING: You are about to delete host. This operation cannot be undone. This operation will delete the initiators of the host and the information about the host from the system.
Suggestion: Before performing this operation, ensure that the selected host is no longer necessary.
Have you read warning message carefully?(y/n)Y
Are you sure you really want to perform the operation?(y/n)Y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368534

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next