No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change smart_cache_partition general

change smart_cache_partition general


The change smart_cache_partition general command is used to modify a SmartCache partition.


change smart_cache_partition general smart_cache_partition_id=? [ name=? ] [ expect_capacity=? ] [ max_io_threshold=? ]





smart_cache_partition_id=? SmartCache partition ID.

To obtain the value, run "show smart_cache_partition general".

name=? SmartCache partition name.

The value is 1 to 31 characters in length and contains letters, numbers, underscores (_), dots(.), and hyphens (-).

expect_capacity=? Expect capacity of the partition.


max_io_threshold=? Maximum threshold of I/Os that can be received by the partition.

The value ranges between 32 and 512 (the default unit is KB).



Usage Guidelines



  • To change the name of the SmartCache partition whose ID is 1 to NN, run the following command:

    admin:/>change smart_cache_partition general smart_cache_partition_id=1 name=NN
    Command executed successfully.
  • To change the capacity of SmartCache 1 to 200 GB, run the following command:

    admin:/>change smart_cache_partition general smart_cache_partition_id=1 expect_capacity=200GB
    Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 363945

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next