No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create fs_snapshot general

create fs_snapshot general

Function

The create fs_snapshot general command is used to create a snapshot.

Format

create fs_snapshot general name=? file_system_id_list=?

Parameters

Parameter

Description

Value

name=? Indicates the name of the snapshot you want to create.

The value consists of 1 to 127 ASCII characters including letters, numbers, and underscores (_).

file_system_id_list=? Indicates the ID of the file system for which you want to create a read-only snapshot.

To obtain the value, run "show file_system general".

You can specify multiple file system IDs separated by commas (,), or ID range separated by hyphens(-), such as: 0,5-8.

Level

Administrator

Usage Guidelines

  • Before performing this command, check whether the ID of the file system for which you want to create a snapshot is correct.
  • Before performing this command, check whether the name of the snapshot you want to create exists and is correct.
  • Multiple file systems can create a snapshot with the same name. Separate the IDs of the file systems with comma (,).

Example

To create snapshot snap1, run the following command:

admin:/>create fs_snapshot general name=snap1 file_system_id_list=0
Create snapshot of file system 0 successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 367159

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next