No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool relocation_speed

show storage_pool relocation_speed

Function

The show storage_pool relocation_speed command is used to query the dynamic relocation rate of storage pools.

Format

show storage_pool relocation_speed

Parameters

None

Level

Guest

Usage Guidelines

None

Example

To query the dynamic relocation rate of storage pools, run the following command:

admin:/>show storage_pool relocation_speed
 
  Relocation Speed : Low

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 303406

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next