No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_lun path

show remote_lun path

Function

The show remote_lun path command is used to query the information about the paths on a remote LUN.

Format

show remote_lun path [ path_id=? ] [ remote_lun_wwn=? ]

Parameters

Parameter

Description

Value

path_id=? Path ID on a remote LUN.

Run the "show remote_lun path remote_lun_wwn=?" command to obtain the value.

remote_lun_wwn=? WWN of a remote LUN.

Run the "show remote_lun general" command to obtain the value.

Level

Guest

Usage Guidelines

The following parameters or parameter sets are mutually exclusive: path_id and remote_lun_wwn.

Example

  • Queries the information about a path on a remote LUN whose WWN is 60:02:2a:11:00:0b:5a:26:06:37:28:12:00:00:00:0b. The command output varies depending on a specific product.

    admin:/>show remote_lun path remote_lun_wwn=60:02:2a:11:00:0b:5a:26:06:37:28:12:00:00:00:0b
     
    Path ID Path Type Local Controller Local Port ID Remote IP Remote WWN Remote Port WWPN Host LUN ID Path Priority
    ------- --------- ---------------- ------------- --------- ---------- ---------------- ----------- -------------
    11 FC Link 0A ENG0.A1.H0 -- -- 200a0022a10b5a26 11 Active
    12 FC Link 0A ENG0.A1.H2 -- -- 201a0022a10b5a26 11 Active
    15 FC Link 0B ENG0.B1.H2 -- -- 201b0022a10b5a26 11 Active
    17 FC Link 0B ENG0.B1.H0 -- -- 200b0022a10b5a26 11 Active
  • Queries the information about a path on a remote LUN whose path ID is 11. The command output varies depending on a specific product.

    admin:/>show remote_lun path path_id=11
     
    Path ID : 11
    Path Type : FC Link
    Local Controller : 0A
    Local Port ID : ENG0.A1.H0
    Target Name : --
    Initiator Name : --
    Remote IP : --
    Local IP : --
    Remote WWN : --
    Local Port WWPN : 20080022a103b480
    Remote Port WWPN : 200a0022a10b5a26
    Host LUN ID : 11
    Path Priority : Active
    Local ISID : --
    Remote TGPT : --

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 350587

Downloads: 1583

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next