No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show enclosure

show enclosure


The show enclosure command is used to query details on the engine and disk enclosure.


show enclosure [ enclosure_id=? ]





enclosure_id=? ID of an engine or disk enclosure.

To obtain the value, run "show enclosure" without parameter.



Usage Guidelines

  • To query details on all engines and disk enclosures, run show enclosure.
  • To query details on a specific engine or disk enclosure, run show enclosure enclosure_id=?.


  • Query details on all engines and disk enclosures. The command output varies depending on a specific product.

    admin:/>show enclosure
    ID Logic Type Health Running Type Temperature
    Status Status (Celsius)
    ------ ------------------ ------ ------ ------------------------ -----------
    ENG0 Engine Normal Online BMC Controller Enclosure 50
    DAE000 Expansion Enclosure Normal Online 4U SAS 24 Slot 28
  • Query details on the engine whose ID is "ENG0". The command output varies depending on a specific product.

    admin:/>show enclosure enclosure_id=ENG0
    ID : ENG0
    Logic Type : Engine
    Health Status : Normal
    Running Status : Online
    Location : SMB0.20U
    Type : BMC Controller Enclosure
    Temperature(Celsius) : 50
    SN : --
    MAC : --
    Height(U) : 4
    Expansion Depth : 0

System Response

The following table describes the parameter meanings.




Enclosure ID.

Logic Type

Logical type of the enclosure.


MAC address of the enclosure.

Electronic Label

Electronic label of the enclosure.

Expansion Depth

Expansion depth of the enclosure.


Enclosure height.


Enclosure SN.


Enclosure temperature (°C).


Enclosure type.

Running Status

Running status of the enclosure.

Health Status

Health status of the enclosure.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 367423

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next