No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create lun_group

create lun_group


create lun_group command is used to create a LUN group.


create lun_group name=? [ lun_group_id=? ] [ lun_id_list=? ]





name=? LUN group name.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).

lun_group_id=? LUN group ID.

The value is an integer ranging from 0 to 8191.

If you do not specify this parameter, the system automatically allocates an ID for a new LUN group.

lun_id_list=? LUN ID list. When this parameter is specified, LUNs corresponding to the IDs will be added to a LUN group.

To obtain the value, run "show lun general".

When multiple LUNs need to be added to a LUN group, separate these LUN IDs with commas (,), or separate LUN ID range with hyphens(-), such as: 0,5-8.



Usage Guidelines

A LUN group can be added with a maximum of 4096 LUNs and a LUN can be added to a maximum of 8 LUN groups.


Create LUN group "LUNGroupTest" and add LUNs "0", "1", and "2" to this group.

admin:/>create lun_group name=LUNGroupTest lun_id_list=0,1,2
Create LUN group successfully.
Add LUN 0 to LUN group successfully.
Add LUN 1 to LUN group successfully.
Add LUN 2 to LUN group successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361621

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next