No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create snapshot duplicate

create snapshot duplicate

Function

The create snapshot duplicate command is used to create duplicates for a snapshot. You can back up a snapshot by running this command.

Format

create snapshot duplicate snapshot_id=? name=?

Parameters

Parameter

Description

Value

snapshot_id=? ID of a snapshot.

To obtain the value, run "show snapshot general".

name=? Name of a snapshot duplicate.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

Level

Administrator

Usage Guidelines

  • Snapshot duplicates can only be created for snapshots in the state of activated.
  • The snapshot time of a snapshot duplicate is the same as the snapshot for which the duplicate is created for.
  • The default state of a newly created snapshot duplicate is activated.

Example

To create a duplicate named dupsnap for snapshot "7", run the following command:

admin:/>create snapshot duplicate snapshot_id=7 name=dupsnap
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 369017

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next