No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication general

change remote_replication general


The change remote_replication general command is used to modify the settings of a specified remote replication.


change remote_replication general remote_replication_id=? { compress_enable=? | recovery_policy=? | synchronization_rate=? | synchronization_type=? | timing_length=? timing_unit=? | second_res_access=? } *





remote_replication_id=? Remote replication ID.

To obtain the value, run "show remote_replication general".

recovery_policy=? Recovery policy.

The value can be "automatic" or "manual", where:

  • "automatic": When interrupted links are recovered, remote replication is automatically resumed. Data is automatically synchronized from the primary LUN to the secondary LUN.
  • "manual": When interrupted links are recovered, remote replication needs to be resumed manually. The secondary LUN retains the state preserved at the time when links are interrupted. Data is not automatically synchronized from the primary LUN to the secondary LUN.
synchronization_type=? Synchronization type. This parameter is available only for asynchronous remote replication.

The value can be "manual", "timed_wait_when_synchronization_begins", "timed_wait_when_synchronization_ends", where:

  • "manual": Data needs to be synchronized manually.
  • "timed_wait_when_synchronization_begins": The system starts timing as soon as data synchronization starts.
  • "timed_wait_when_synchronization_ends": The system starts timing as soon as data synchronization ends.
synchronization_rate=? Synchronization rate.

The value can be "Low", "Middle", "High", or "Highest", where:

  • "Low": indicates the low rate.
  • "Middle": indicates the medium rate.
  • "High": indicates the high rate.
  • "Highest": indicates the highest rate.
timing_length=? Timing period (data synchronization period). This parameter is available only when synchronization_type=? is set to "timed_wait_when_synchronization_begins" or "timed_wait_when_synchronization_ends".
  • The value ranges from 1 to 1440, expressed in minutes.
  • The value ranges from 3 to 59, expressed in seconds.
timing_unit=? Unit of the synchronization period.

The value can be:

  • "minute": indicates minutes.
  • "second": indicates seconds.
second_res_access=? Read and write attributes of the secondary LUN.

The value can be "read_only" or "read_write", where:

  • "read_only": The secondary LUN can only be read.
  • "read_write": The secondary LUN can be read and written.
compress_enable=? Whether to enable compress.

The value can be "yes" or "no", where: 1:yes:enable compress. 2:no:disable compress.



Usage Guidelines



Change the recovery policy of remote replication "9747215445131264" to "automatic".

admin:/>change remote_replication general remote_replication_id=9747215445131264 recovery_policy=automatic
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368518

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next