No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_pair general

delete hyper_metro_pair general

Function

The delete hyper_metro_pair general command is used to delete a HyperMetro pair.

Format

delete hyper_metro_pair general pair_id=? [ is_local_delete=? | is_refresh_wwn=? ] *

Parameters

Parameter

Description

Value

pair_id=? ID of the HyperMetro pair.

To obtain the value, run "show hyper_metro_pair general".

is_local_delete=? Whether the pair will be deleted from the local device. Only when "is_local_delete" is set to "yes", parameter "is_refresh_wwn" is displayed.

The value can be "yes" or "no", where:

  • "yes": The pair will be deleted from the local device.
  • "no": The pair will not be deleted from the local device.
The default value is "no".
is_refresh_wwn=? Whether to refresh the LUN WWN (valid for SAN HyperMetro pair local deletion only).

The value can be "yes" or "no", where:

  • "yes": refreshes the WWN.
  • "no": not refreshes the WWN.
The default value is "yes".

Level

Administrator

Usage Guidelines

None.

Example

  • Deleting HyperMetro pair "1" from the local device.

    admin:/>delete hyper_metro_pair general pair_id=1 is_local_delete=yes
    WARNING: You are about to delete a HyperMetro pair. The deletion cannot be undone. If you need the configuration later, you must create it again.
    To prevent LUN WWN conflicts, refresh LUN WWNs when you delete a HyperMetro pair from the local storage array that is not accessed by hosts.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • Deleting HyperMetro pair "1".

    admin:/>delete hyper_metro_pair general pair_id=1
    WARNING: You are about to delete a HyperMetro pair. The deletion cannot be undone. If you need the configuration later, you must create it again.
    To prevent LUN WWN conflicts, refresh LUN WWNs when you delete a HyperMetro pair from the local storage array that is not accessed by hosts.
    Suggestion: Before performing this operation, ensure that the parameters are configured correctly to prevent service exceptions.
    Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361911

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next