No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change service ndmp_scanbus

change service ndmp_scanbus

Function

The change service ndmp_scanbus command is used to execute the scanbus command.

Format

change service ndmp_scanbus

Parameters

None

Level

Administrator

Usage Guidelines

None

Example

Execute the scanbus command.

admin:/>change service ndmp_scanbus
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 276324

Downloads: 1559

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next