No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dns_server general

change dns_server general


The change dns_server general command is used to modify information about the management DNS server of a storage array.


change dns_server general [ address=? ] [ check_switch=? ] [ check_period=? ]





address=? List of DNS server IP addresses.

A maximum of three IP addresses are supported. Separate the IP addresses with commas (,). For example, address=,, Both IPv4 and IPv6 addresses are supported.

check_switch=? Automatic check switch.

The automatic check switch can be turned on or off. By default, it is turned on.

check_period=? Automatic check period.

The automatic check period ranges from 1 to 30 minutes and the system default value is two minutes.



Usage Guidelines



Setting the IP addresses of the DNS server to,, and, turning on the automatic check switch, and setting the check period to two minutes.

admin:/>change dns_server general address=,, check_switch=on check_period=2
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362510

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next