No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add hypervault remote_resource

add hypervault remote_resource

Function

The add hypervault remote_resourcel command is used to add the remote backup function of HyperVault.

Format

add hypervault remote_resource hypervault_id=? remote_device_id=? remote_fs_id=? [ recover_policy=? ] [ backup_rate=? ] [ start_backup_after_create=? ]

Parameters

Parameter

Description

Value

hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

remote_device_id=? ID of the remote device.

To obtain the value, run the "show remote_device general" command.

remote_fs_id=? ID of the remote file system.

To obtain the value, run the "show file_system general" command without parameters on the remote device.

recover_policy=? Error rectifying policy.

The value is "automatic" or "manual", where:

  • "automatic": The hypervault will automatically recover, and data will be automatically backup from the primary device to the secondary device.
  • "manual": The hypervault needs to be recovered manually. Data will not be automatically backup from the primary device to the secondary device.
The default value is "manual".
backup_rate=? Backup rate.

The value is "low", "middle", "high", or "highest", where:

  • "low": slow backup speed.
  • "middle": medium backup speed.
  • "high": fast backup speed.
  • "highest": the fastest backup speed.
The default value is "middle".
start_backup_after_create=? Whether to immediately start backup after a remote replication job is created.

The value is "yes" or "no", where:

  • ""yes"": to start the initial backup.
  • "no": not to start the initial backup.
The default value is "yes".

Level

Administrator

Usage Guidelines

None

Example

Create a remote backup function for HyperVault "8675433423". The remote device ID is "0", and remote file system ID is "1".

admin:/>add hypervault remote_resource hypervault_id=8675433423  remote_device_id=0 remote_fs_id=1 
 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 346505

Downloads: 1581

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next