No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show clone secondary_lun

show clone secondary_lun


The show clone secondary_lun command is used to query the information about secondary LUNs of a clone.


show clone secondary_lun clone_id=? [ lun_id=? ]





clone_id=? Clone ID.

To obtain the value, run "show clone general".

lun_id=? Secondary LUN ID.

To obtain the value, run "show clone secondary_lun clone_id=?".



Usage Guidelines

  • To query the information about all secondary LUNs of a specific clone, run show clone secondary_lun clone_id=?.
  • To query the details about a specific secondary of a specific clone, run show clone secondary_lun clone_id=? lun_id=?.


  • Querying information about all the secondary LUNs of clone "2".

    admin:/>show clone secondary_lun clone_id=2
    ID  LUN Name  Data Status  Pair ID  Health Status  Running Status  LUN Capacity  Second LUN Access  
      --  --------  -----------  -------  -------------  --------------  ------------  -----------------  
      2   cln0001   Consistent   0        Normal         Splited              1.000GB  Read and Write
  • Querying information about secondary LUN "2" of clone "2".

    admin:/>show clone secondary_lun clone_id=2 lun_id=2
    ID : 2
    LUN Name : newlun0002
    Data Status : Synchronizing
    Pair ID : 0
    Health Status : Normal
    Running Status : Synchronizing
    Rate : Middle
    Process : 11
    Start Time : 2012-09-20/09:04:55 +08:00
    End Time : --
    Split Time : --
    Recovery Policy : Automatic
    LUN Role : Secondary
    LUN Capacity : 5.000GB
    Clone ID : 2
    Second LUN Access : Read Only

System Response

The following table describes the parameter meanings.




ID of the secondary LUN.

LUN Name

Name of the LUN.

Data Status

Status of the data.

Pair ID

ID of the pair.

Health Status

Health status.

Running Status

Running status.


Rate of the pair.


Process of the synchronization.

Start Time

Start time of the synchronization.

End Time

End time of the synchronization.

Split time

Time of the split.

Recovery Policy

Recovery policy.

LUN Role

Role of the LUN.

LUN Capacity

Capacity of the LUN.

Clone ID

ID of the clone.

Second LUN Access

Read and write attributes of the secondary LUN.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368122

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next