No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show notification syslog

show notification syslog


The show notification syslog command is used to query the settings of syslog notification.


show notification syslog





Usage Guidelines



Query the settings of syslog notification.

admin:/>show notification syslog
  Enabled                  : Yes 
  Alert Level              : Warning 
  Syslog Server IP         :
  Enable Alarm             : Yes
  Enable Recovery Alarm    : No
  Enable Event             : No
  Enabled Send System Name : Yes
  Syslog Server Port       : 514
  Sending Channel          : TLS

System Response

The following table describes the parameter meanings.




Indicates whether the syslog notification function is enabled.This function is disabled by default.

Alert Level

Indicates the lowest alarm severity required by syslog notification to report an alarm.

Syslog Server IP

Indicates the address of the syslog server.

Enable Alarm

Indicates whether the alarm syslog notification function is enabled.This function is enabled by default.

Enable Recovery Alarm

Indicates whether the recovery alarm syslog notification function is enabled.This function is disabled by default.

Enable Event

Indicates whether the event syslog notification function is enabled.This function is disabled by default.

Enabled Send System Name

Indicates whether the storage system name is included in syslogs.

Syslog Server Port

Receiving port number of the syslog server.

Sending Channel

syslog sending channel.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362775

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next