No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system dst

show system dst


The show system dst command is used to query the daylight saving time (DST) settings of the storage system.


show system dst continent=? capital=?





continent=? General area (continent or region) where the storage system resides.

The value can be "Europe", "Australia", "Africa", "Asia", "Atlantic", "Pacific", or "America".

capital=? Specific area (major city, province, or state) where the storage system resides.

The value varies depending on the continent=? parameter. Refer to the information displayed in the CLI.



Usage Guidelines

The storage system automatically sets the DST based on the configured time zone. The DST is not applicable to some time zones.


To query the DST settings of the storage system, run the following command. The command output varies depending on cli interface.

admin:/>show system dst continent=Africa capital=Cairo
  Time Zone            : Africa/Cairo  
  Begin Time           : 04-25 18:00:00 
  End Time             : 09-26 18:00:00 
  Adjust Time(Minutes) : 60            
  Config Mode          : Date

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361622

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next