No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add lun_copy local_target

add lun_copy local_target


The add lun_copy local_target command is used to add local target logical unit numbers (LUNs) to a LUN copy task. You can add extra local target LUNs as required by running this command.


add lun_copy local_target lun_copy_id=? target_lun_id=?





lun_copy_id=? ID of a LUN copy.

To obtain the value, run "show lun_copy general".

target_lun_id=? ID of a local LUN to be added.

To obtain the value, run "show lun general".



Usage Guidelines

  • The data of a source LUN overwrites that of a target LUN upon the start of a LUN copy task.
  • Before running this command, ensure that the selected LUN copy task and target LUN are exactly the ones you want to use for a LUN copy task, and that no application sever is accessing the target LUN.
  • The selected LUN copy can not be in the state of copying or paused.
  • Different LUN copy tasks cannot share the same target LUN.


To add local target LUN "2" to LUN copy "0", run the following command:

admin:/>add lun_copy local_target lun_copy_id=0 target_lun_id=2
WARNING: You are about to build a LUN copy relationship between source LUN and target LUN. After this operation, the data on the target LUN will be overwritten by the data on the source LUN.
Suggestion:Before performing this operation, ensure that the selected source and target LUNs are correct, and the target LUN is not being read or written by hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361996

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next