No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change user_password

change user_password


The change user_password command is used to change current user's logging password.


change user_password





Usage Guidelines

  • The password consists of 8 to 16 characters and is case-sensitive.
  • The password must contain special characters including` ~ ! @ # $ % ^ & * ( ) - _ = + \ | [ { } ] ; :' " , < . > / ? and space.
  • The password must meet password complexity requirements:
    • When "password complex" is set to "Normal", the password must contain at least two of the following three: lowercase character, uppercase character, and number.
    • when "password complex" is set to "High", the password must contain lowercase character, uppercase character, and number.
  • The password must be different from the user name and the username in reversed order.
  • One character must not appear for more than three times consecutively.
You can use the "change safe_strategy" command to change the password and login policies of a storage system.


To change the password of the logged-in "admin" user, run the following command.

admin:/>change user_password
Old password:*********
New password:*************
Reenter password:*************
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361573

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next