No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show vm_container general

show vm_container general

Function

The show vm_container general command is used to query information about all virtual machine (VM) containers.

Format

show vm_container general

Parameters

None

Level

Guest

Usage Guidelines

Only OceanStor 5300 V3 (32 GB memory), 5500 V3 (48 GB/64 GB memory), 5600 V3 (64 GB/128 GB memory), and 5800 V3 (128 GB/256 GB memory) support this command.

Example

Querying information about objects in VM containers.

admin:/>show vm_container general
  VM Container ID Owner Controller ID Health Status Total Memory Free Memory CPU Isolate Enable CPU Counts Available CPU Counts 
  --------------- ------------------- ------------- ------------ ----------- ------------------ ---------- --------------------
  0               0A                  Normal            19.000GB    19.000GB Yes                8          6
  1               0B                  Normal            19.000GB    19.000GB Yes                8          6

System Response

The following table describes the parameter meanings.

Parameter

Meaning

VM Container ID

ID of the VM container.

Owner Controller ID

ID of the owning controller.

Health Status

Health status of the VM container.

Total Memory

Total memory capacity of the VM container, expressed in GB.

Free Memory

Free memory capacity of the VM container, expressed in GB.

CPU Isolate Enable

Whether to isolate the CPU.

CPU Counts

Number of CPUs used by the VM container.

Available CPU Counts

Number of CPUs available to the VM container.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 299765

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next