No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add port_group port

add port_group port

Function

add port_group port command is used to add ports to a port group. The ID varies depending on a specific product.

Format

add port_group port port_group_id=? port_type=? port_id_list=?

Parameters

Parameter

Description

Value

port_group_id=? ID of a port group to which you want to add ports.

To obtain the value, run "show host_group general".

port_type=? Type of a port that you want to add.

The value can be "FC", "ETH", "FCoE", or "IB", where:

  • "FC": indicates Fibre Channel ports.
  • "ETH": indicates ETH ports.
  • "FCoE": indicates FCoE ports.
  • "IB": indicates IB ports.
port_id_list=? ID of a port that you want to add.
  • To obtain the value, run "show port general".
  • When multiple ports need to be added, separate these port IDs with commas (,).

Level

Administrator

Usage Guidelines

None.

Example

Add port "ENG0.A2.P2" whose type is "ETH" to port group "0".

admin:/>add port_group port port_group_id=0 port_type=ETH port_id_list=ENG0.A2.P2
Add port ENG0.A2.P2 to port group successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 273200

Downloads: 1556

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next