No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_port count

show ib_port count


The show ib_port count command is used to calculate the number of IB ports.


show ib_port count [ parent_type=? ] [ logical_type=? ]





parent_type=? Parent type.

The value can be "controller", "expand_board", or "interface_module", where:

  • controller: indicates a controller.
  • expand_board: indicates an expansion board.
  • interface_module: indicates an interface module.
logical_type=? Logical port type.

The value can be "host", "exp", "mngt", "maintenance", "innter", "mngt_srv" , "maintenance_srv", "backup_mgr", "product_storage", "backup_storage", "eth_not_config", or "ip_scale_out", where:

  • host: indicates a host port.
  • exp: indicates an expansion port.
  • mngt: indicates a management network interface.
  • maintenance: indicates a maintenance port.
  • innter: indicates an internal port.
  • mngt_srv: indicates a port that can function as both a management port and a service port.
  • maintenance_srv: indicates a port that can function as both a maintenance port and a service port.
  • backup_mgr: indicates a backup management network interface.
  • product_storage: indicates a production storage network interface.
  • backup_storage: indicates a backup storage network interface.
  • eth_not_config: indicates a network interface for which no roles have been configured.
  • ip_scale_out: indicates a network interface for IP Scale-Out.



Usage Guidelines

Parameters "parent_type" and "logical_type" are mutually exclusive.


To calculate the number of IB ports, run the following command:

admin:/>show ib_port count
  IB Port Number : 2

System Response

The following table describes the parameter meanings.



IB Port Number

Number of IB ports.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362592

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next