No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show host reachable

show host reachable

Function

The show host reachable command is used to query whether a host is reachable.

Format

show host reachable { dest_ipv4=? | dest_ipv6=? | hostname=? } [ count=? ] [ controller=? ]

Parameters

Parameter

Description

Value

count=? Count of ping operations.

The value ranges from 1 to 30. The default value is "4".

dest_ipv4=? Host IP address.

The value can be an IPv4.

dest_ipv6=? Host IP address.

The value can be an IPv6.

hostname=? Host Name.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

controller=? Controller ID.

To obtain the value, run the "show controller general" command.

Level

Administrator

Usage Guidelines

None

Example

  • Query whether IP address 192.168.90.160 is reachable.

    admin:/>show host reachable controller=0A count=5 dest_ipv4=192.168.90.160
    Local Controller  :  0A
    Remote Host       :  192.168.90.160
    Reachable         :  Yes
  • Query whether IP address fe80::3600:a3ff:fedc:46c2 is reachable.

    admin:/>show host reachable controller=0A count=5 dest_ipv6=fe80::3600:a3ff:fedc:46c2
    Local Controller  :  0A
    Remote Host       :  fe80::3600:a3ff:fedc:46c2
    Reachable         :  Yes
     
  • Query whether IP address fe80::3600:a3ff:fedc:46c2 is reachable.

    admin:/>show host reachable count=5 dest_ipv6=fe80::3600:a3ff:fedc:46c2
    Local Controller  :  0A
    Remote Host       :  fe80::3600:a3ff:fedc:46c2
    Reachable         :  Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Reachable

Reachable.

Local Controller

Local Controller.

Remote Host

Remote host informaiton.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 306565

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next