No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change clone synchronize

change clone synchronize

Function

The change clone synchronize command is used to synchronize the primary logical unit number (LUN) with existing secondary LUNs for a clone task.

Format

change clone synchronize clone_id=? lun_id=?

Parameters

Parameter

Description

Value

clone_id=? ID of a clone task that you want to synchronize the primary LUN with existing secondary LUNs.

To obtain the value, run "show clone general".

lun_id=? ID of a secondary LUN.

To obtain the value, run "show clone secondary_lun".

Level

Administrator

Usage Guidelines

For a clone task, running this task overwrites the data of a secondary LUN using that of the primary LUN.

Example

To synchronize the data of the primary LUN with secondary LUN "9" for clone task "3", run the following command.

admin:/>change clone synchronize clone_id=3 lun_id=9
DANGER: You are about to synchronize secondary LUN of clone. This operation will overwrite data on the secondary LUN with that on the primary LUN. The secondary LUN will become read-only or cannot be read or written. Then services on the secondary LUN may be affected.
Suggestion: Before performing this operation, ensure that the selected secondary LUN is correct and there is no service on the secondary LUN, preventing impact on services.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084195

Views: 306164

Downloads: 1561

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next