No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add consistency_group remote_replication_delay

add consistency_group remote_replication_delay


The add consistency_group remote_replication_delay command is used to add the remote replication into the consistency group after the initial synchronization of the remote replication is complete.


add consistency_group remote_replication_delay consistency_group_id=? remote_replication_id=?





consistency_group_id=? ID of a consistency group.

To obtain the value, run "show consistency_group general".

remote_replication_id=? ID of the remote replication tasks that you want to add to a consistency group.

To obtain the value, run "show remote_replication general".



Usage Guidelines

  • This command can be used when: the initial synchronization of an asynchronous consistency group is complete; the asynchronous consistency group is in the cycle mode; and you do not want to affect the RPO of the asynchronous consistency group after adding the remote replication that is in initial synchronization into the asynchronous consistency group.
  • This is an asynchronous command. After you execute this command, operations, such as splitting the remote replication, consistency group, adding the remote replication to the consistency group, and restarting the synchronization of the consistency group, are performed on the background.
  • This command can only be performed when the consistency group having at least one member is in the synchronization or normal state, and the remote replication is in the initial synchronization.
  • Therefore, after you perform this operation, do not operate the remote replication and consistency group to prevent operation failures.


To add remote replication task whose ID is respectively "9747215445131234" to consistency group "9747215445131264" in delayed mode, run the following command.

admin:/>add consistency_group remote_replication_delay consistency_group_id=9747215445131264 remote_replication_id=9747215445131234
CAUTION: You are about to add a remote replication to a consistency group in delayed mode. Before performing this operation, note that:
1. This operation is an asynchronous operation, and will be executed after the initial synchronization of the remote replication is complete. 
2. Before adding a remote replication to a consistency group, do not operate the remote replication and consistency group. Otherwise, this operation may fail, and the remote replication and consistency group will be in split state. 
Suggestion: Perform this operation based on customer requirements.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368475

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next