No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show virtual_machine port

show virtual_machine port

Function

The show virtual_machine port command is used to check the relationship between virtual machines (VMs) and ports.

Format

show virtual_machine port [ vm_id=? ]

Parameters

Parameter

Description

Value

vm_id=? VM ID.

To obtain the value, run the "show virtual_machine general" command without parameters.

Level

Guest

Usage Guidelines

Only OceanStor 5300 V3 (32 GB memory), 5500 V3 (48 GB/64 GB memory), 5600 V3 (64 GB/128 GB memory), and 5800 V3 (128 GB/256 GB memory) support this command.

Example

  • Check the relationship between VMs and ports.

    admin:/>show virtual_machine port
      ID      VM ID  Health Status  Running Status  Mapping Mode  Use Type      Mac                Bond Name  Port Type  Port ID List                   
      ------  -----  -------------  --------------  ------------  ------------  -----------------  ---------  ---------  -----------------------------  
      131073  2      Normal         Link Up         Bridge Link   Primary Port  54:64:a7:0f:e8:a5  --         ETH        CTE0.A.IOM0.P1                 
      139009  2      Normal         Link Up         Bridge Link   Primary Port  54:64:a7:0f:e8:c6  bond_0_1   Bond       CTE0.A.IOM0.P0,CTE0.A.IOM0.P2
  • Check the relationship between VMs and ports by a specified virtual machine .

    admin:/>show virtual_machine port vm_id=2
      ID      VM ID  Health Status  Running Status  Mapping Mode  Use Type      Mac                Bond Name  Port Type  Port ID List                   
      ------  -----  -------------  --------------  ------------  ------------  -----------------  ---------  ---------  -----------------------------  
      131073  2      Normal         Link Up         Bridge Link   Primary Port  54:64:a7:0f:e8:a5  --         ETH        CTE0.A.IOM0.P1                 
      139009  2      Normal         Link Up         Bridge Link   Primary Port  54:64:a7:0f:e8:c6  bond_0_1   Bond       CTE0.A.IOM0.P0,CTE0.A.IOM0.P2

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Port ID.

VM ID

VM ID.

Health Status

Health status of the port.

Running Status

Operating status of the port.

Mapping Mode

Mapping mode of the port.

Use Type

Using type of the port.

MAC

MAC address of the port in the VM.

Bond Name

Name of the bond port.

Port Type

Type of the port.

Port ID List

List of the port ID.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 363461

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next