No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system timezone

change system timezone


The change system timezone command is used to change the time zone where the storage system resides in. If the displayed time zone is different from the actual local time zone, you can run this command to change the time zone.


change system timezone continent=? capital=?





continent=? General area (continent or region) where the storage system resides.

The value can be "Europe", "Australia", "Africa", "Asia", "Atlantic", "Pacific", or "America".

capital=? Specific area (major city, province, or state) where the storage system resides.

The value varies depending on the continent=? parameter. Refer to the information displayed in the CLI.


Super administrator

Usage Guidelines

  • If the storage system's time zone is changed incorrectly, the scheduled tasks and the maintenance engineers' work are adversely affected.
  • Before running this command, check whether the time zone you want to set is correct.


To change the storage system's time zone to "Asia/Shanghai".

admin:/>change system timezone continent=Asia capital=Shanghai
WARNING: You are about to change the system time zone.This operation may affect licenses, alarms, and SystemReporter.
Suggestion: Before performing this operation, ensure that the time zone needs to be changed.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operaton?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362599

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next