No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_device elink

show remote_device elink


The show remote_device elink command is used to query the information about the heterogeneous links connected to a storage system.


show remote_device elink [ link_type=? ] [ link_id=? ] [ remote_device_id=? ]





remote_device_id=? ID of a remote device.

Run the "show remote_device general" command to obtain the value.

link_type=? Link type.


  • FC:A remote device is connected to a local device by Fibre Channel links.
  • iSCSI:A remote device is connected to a local device by iSCSI links.
link_id=? Link ID.

Run the "show remote_device elink" command without parameters to obtain the value.



Usage Guidelines



Queries the information about heterogeneous links whose type is Fibre Channel and whose ID is 514.

admin:/>show remote_device elink link_type=FC remote_device_id=514
ID Health Status Running Status Local Controller Remote Device Type 
--------- ------------- -------------- ---------------- ---------- 
268435456 Normal Link Up 0A Heterogeneity
268435457 Normal Link Up 0B Heterogeneity
268435458 Normal Link Up 0A Heterogeneity
268435459 Normal Link Up 0B Heterogeneity
In Remote Device Remote Device ID Remote Device WWN Remote Controller 
------------ ---------------- ----------------- ----------------- 
Yes 514 a1003300 -- 
Yes 514 a1003300 -- 
Yes 514 a1003300 -- 
Yes 514 a1003300 -- 

System Response

The following table describes the parameter meanings.




ID of the heterogeneous link.

Health Status

Health state of the heterogeneous link.

Running Status

Running state of the heterogeneous link.

Local Controller

ID of local controller.

Remote Device Type

Type of remote device.

In Remote Device

Whether the remote device is connected to the system.

Remote Device ID

ID of remote device.

Remote Device WWN

World wild name of remote device.

Remote Controller

ID of remote controler.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362535

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next