No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show smartqos_policy general

show smartqos_policy general


The show smartqos_policy command is used to query details on existing SmartQoS policies of the storage system. By using the SmartQoS, the storage system can allocate its resources to different types of I/Os on demand.


show smartqos_policy general [ smartqos_policy_id=? ]





smartqos_policy_id=? ID of a SmartQoS policy.

To obtain the value, run "show smartqos_policy" without parameters.



Usage Guidelines

  • To query details on existing SmartQoS policies, run show smartqos_policy.
  • To query details on a specific SmartQoS policy, run show smartqos_policy smartqos_policy_id=?.


  • To query details on existing SmartQoS policies, run the following command:

    admin:/>show smartqos_policy general
    ID Name Health Status Running Status IO Type Enabled LUN List Filesystem List
    -- ------- ------------- -------------- ---------- ------- -------- -------
    0 newqos Normal Inactive Read_write No -- --
    3 newqos2 Normal Inactive Read No 0,1,2 3,4,5
    2 newqos3 Normal Inactive Write No 7 --
    4 newqos3 Normal Inactive Write No -- 8,9
  • To query details on SmartQoS policy "0", run the following command.

    admin:/>show smartqos_policy general smartqos_policy_id=0
    ID : 0
    Name : SmartQoS000
    Health Status : Normal
    Running Status : Inactive
    IO Type : Read
    Enabled : No
    LUN List : 0,1,2,3
    Max Bandwidth(MBps) : --
    Min Bandwidth(MBps) : --
    Max IOPS : 5000
    Min IOPS : --
    Latency(ms) : 0
    Schedule Policy : Weekly
    Schedule Start Time : 2013-12-21
    Start Time : 08:00
    Duration : 24 hour(s),0 minute(s)
    Schedule Days : Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    Filesystem List: --

System Response

The following table describes the parameter meanings.



Health Status

The health status.

Running Status

The running status.

IO Type

The type of the IO that you want to control.

LUN List

Logical unit numbers of LUNs that you add to SmartQoS policy.

Max Bandwidth

The maximum bandwidth.

Min Bandwidth

The minimum bandwidth.


The maximum number of IOPS.


The minimum number of IOPS.


Latency for SmartQoS policy.

Schedule Policy

The time policy for triggering the SmartQoS.

Schedule Start Time

The day from which a scheduled SmartQoS task will be started.

Start Time

The time from which a scheduled SmartQoS task will be started on a specific day.


The duration for performing a scheduled SmartQoS task.

Filesystem List

Logical unit numbers of filesystems that you add to a SmartQoS policy.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361925

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next