No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain controller

show domain controller

Function

The show domain controller command is used to check the current domain controller list.

Format

show domain controller

Parameters

None

Level

Guest

Usage Guidelines

This command does not support the OceanStor

Usage Guidelines

None.

V3 storage system.

Example

To check the current domain controller list, run the following command:

admin:/>show domain controller
Domain Controller Name FQDN Name Priority Weight Write Enabled Prime Domain Controller Enabled Is Available Controller IP Address 
---------------------- ----------------------- -------- ------ ------------- ------------------------------- ----------------------- ------------------------------- 
WIN-6KF39LUH71U win-6kf39luh71u.qqq.com 0 100 Yes Yes Yes 10.178.130.7:1,192.168.130.7:1
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Domain Controller Name

Indicates the name of the domain controller.

FQDN Name

Indicates the FQDN of the domain controller.

Priority

Indicates the priority of the domain controller.

Weight

Indicates the domain controller weight.

Write Enabled

Indicates whether the domain controller allows writes.

Prime Domain Controller Enabled

Indicates whether the domain controller is the primary controller.

Is Available Controller

Indicates whether the domain controller is available.

IP Address

Indicates the IP address of the domain controller.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 363319

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next