No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hypervault remote_resource

remove hypervault remote_resource


The remove hypervault remote_resource command is used to delete the remote backup function.


remove hypervault remote_resource hypervault_id=? [ reserve_copy=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run "show hypervault general" without parameters.

reserve_copy=? Policy reserving policy.

The value is "yes" or "no", where:

  • "yes": to reserve copies.
  • "no": to delete copies.
The default value is "yes".



Usage Guidelines



To delete remote backup of hypervault task "9747215445131264", run the following command.

admin:/>remove hypervault remote_resource hypervault_id=9747215445131264
DANGER: You are about to remove the remote backup function of HyperVault.
This operation deletes the remote backup relationship between the primary and secondary file systems. New data written into the primary file system cannot be remotely backed up. Data of the file system copies on the secondary file system cannot be recovered to the primary system. The deletion cannot be undone.
Suggestion: Before performing this operation, ensure that you have selected the correct object to delete.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 361623

Downloads: 1588

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next