No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault_copy restore

change hypervault_copy restore


The restore hypervault_copy general command is used to restore a copy to the primary file system.


change hypervault_copy restore copy_id=?





copy_id=? ID of the HyperVault copy.

To obtain the value, run the "show hypervault_copy general hypervault_id=?" command.



Usage Guidelines



Restore copy "556653223" to primary filesystem.

admin:/>change hypervault_copy restore copy_id=556653223 
DANGER: You are about to recover the data in a copy to the primary file system.
If this operation is performed on the primary file system, data in the file system is recovered to the data in the copy of the primary file system. The copies that are created after this copy will be deleted.
If this operation is performed on the secondary file system, data in the primary file system is recovered to the data in the copy of the secondary file system. The data recovery time depends on the data amount in the copies.
Suggestion: Before performing this operation, back up the data in the primary file system first and ensure that you have selected the correct copy. Besides, ensure that the primary file system is not being read or written. 
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365603

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next