No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create consistency_group synchronization

create consistency_group synchronization


The create consistency_group synchronization command is used to create synchronous consistency groups. You can centrally manage multiple synchronous remote replication tasks by running this command.


create consistency_group synchronization name=? { recovery_policy=? | synchronization_rate=? } *





name=? Name of a consistency group.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.),can only start with a digit or a letter.

recovery_policy=? A link recovery policy. This parameter defines a policy for recovering the links that were unexpectedly disconnected for the remote replication tasks in a consistency group.

The value can be:

  • "automatic": When links are recovered, the remote replication tasks in the consistency group are resumed automatically.
  • "manual": When links are recovered, the remote replication tasks in the consistency group need to be resumed manually. The consistency group retains the state preserved at the time when links are interrupted, and does not resume the interrupted remote replication tasks automatically.
The default value is "automatic".
synchronization_rate=? A synchronization rate.

The value can be

  • "Low": indicates the low rate.
  • "Middle": indicates the medium rate.
  • "High": indicates the high rate.
  • "Highest": indicates the highest rate.
The default value is "Middle".



Usage Guidelines

  • Ansynchronous consistency group can only contain synchronous instead of asynchronous remote replication tasks.
  • For a synchronous remote replication task, the storage system writes both the primary LUN and existing secondary LUNs. In this condition, a host will be informed that the write request has been successfully responded only after writing both the primary and secondary LUNs has succeeded. This replication mode ensures data consistency between each pair of primary and secondary LUNs but suffers from a relatively low responsiveness to write requests.


To create a synchronous consistency group, where the name of the consistency group is "abc", the recovery policy is automatic, and the synchronization rate is low, run the following command:

admin:/>create consistency_group synchronization name=abc recovery_policy=automatic synchronization_rate=low
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 365570

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next