No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system general

show system general

Function

The show system general command is used to query the general system information.

Format

show system general

Parameters

None

Level

Guest

Usage Guidelines

None.

Example

To query the general system information, run the following command. The command output varies depending on a specific product. In the following command output, the fields related to the product model are replaced by "X".

admin:/>show system general
  System Name         : XXX.Storage 
  Health Status       : Normal 
  Running Status      : Normal 
  Total Capacity      : 3.186TB 
  SN                  : 210235G6EHZ0CX0000XX 
  Location            : 
  Product Model       : XXXX 
  Product Version     : VX00R00XCXX 
  High Water Level(%) : 80 
  Low Water Level(%)  : 30 
  WWN                 : XXXX 
  Time                : 2015-07-07/15:34:05 UTC+08:00
  Patch Version       : SPCXXX SPHXXX

System Response

The following table describes the parameter meanings.

Parameter

Meaning

System Name

Device name.

Health Status

Indicates the health status.

Running Status

Indicates the running status.

Total Capacity

Total capacity of all member disks.

SN

Device serial number.

Location

Device location.

Product Model

Product model.

Product Version

Product version.

High Water Level(%)

High water level. The upper threshold for the amount of the dirty data stored in the Cache. When the amount of the dirty data stored in the Cache reaches the high water level, the Cache starts to synchronize dirty data into disks.

Low Water Level(%)

Low water level. The low threshold for the amount of dirty data stored in the Cache. When the amount of the dirty data stored in the Cache falls to the low water level, the Cache stops synchronizing dirty data into disks.

Time

Current time.

Patch Version

Patch version.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 366333

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next