No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete notification trap

delete notification trap

Function

The delete notification trap command is used to delete a trap server.

Format

delete notification trap server_id=?

Parameters

Parameter

Description

Value

server_id=? ID of the trap server.

To obtain the value, run "show notification trap" without parameters.The value must be an integer from 0 to 3.

Level

Administrator

Usage Guidelines

After the trap server is deleted, the corresponding application sever or maintenance terminal cannot receive alarm information from the storage system.

Example

To delete the trap server whose ID is "1", run the following command.

admin:/>delete notification trap server_id=1
WARNING: You are about to delete Trap IP address. After this operation, the corresponding Trap Server cannot receive alarms from the current device.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368158

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next