No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file export_path

show file export_path


This show file export_path command is used to export system data to a directory in the storage system and show the directory to users.


show file export_path file_type=? [ controller_id=? ]





file_type=? File type.

The value can be "event", "log", "running_data", "configuration_data", "all_log", "smart", or "workload", where:

  • "event": indicates event files.
  • "log": indicates log files.
  • "running_data": indicates system running data files.
  • "configuration_data": indicates system configuration files.
  • "all_log": indicates all logs of the system.
  • "smart": indicates disk smart info.
  • "workload": workload.
controller_id=? Controller ID.

Controller IDs are separated by commas (,), the value is in the format of "XA","XB","XC","XD", where the "X" is an integer from 0 to 3, for example: "0A","1C". This parameter can be specified only when "file_type" is set to "log", "all_log", or "smart".



Usage Guidelines

  • This "show file export_path" command is used to export system data to a directory in the storage system and show the directory to users.
  • This "show file export_path file_type=? [ controller_id=? ]" command is used to export system data of a specific controller to a directory in the storage system and show the directory to users. The save paths of "log", "all_log", "smart", and "workload" are not returned to users.
  • This command is used by information collection tools to gather system information, best to be run with the "delete file" command on the same node.


To export system configuration data and show the path to users, run the following command.

admin:/>show file export_path file_type=configuration_data 
File Path : /OSM/export_import/db.dat

System Response

The following table describes the parameter meanings.



File Path

File storage path.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362713

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next