No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_destroy_data upgrade_status

show lun_destroy_data upgrade_status


The show lun_destroy_data upgrade_status command is used to query the upgrade data of LUN destroying.


show lun_destroy_data upgrade_status





Usage Guidelines

Run the "show lun_destroy_data upgrade_status" command to query the upgrade data of LUN destroying.


Checks the LUN destruction upgrade state.

admin:/>show lun_destroy_data upgrade_status
  Upgrade Status : True

System Response

The following table describes the parameter meanings.



Upgrade Status

The status of upgrade.

Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 362524

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next