No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change controller smartport_work_mode

change controller smartport_work_mode

Function

The change controller smartport_work_mode command is used to modify the work mode of the smart ports on a specific controller.

Format

change controller smartport_work_mode controller=? mode=?

Parameters

Parameter

Description

Value

controller=? ID of an controller.

To obtain the value, run "show controller general" without parameter.

mode=? Smart ports work mode.

The value can be "FC", or "FCoE/iSCSI", where:

  • "FC": indicates the smart ports on the controller work on FC mode.
  • "FCoE/iSCSI": indicates the smart ports on the controller work on FCoE/iSCSI mode.

Level

Administrator

Usage Guidelines

  • Before you perform this operation, ensure that the services of all smart ports on the controller are stopped.
  • After performing this operation, create a new network based on the current work mode of the smart ports on the controller.

Example

To change the work mode of the smart ports on the controller whose id is "0A" to FC.

admin:/>change controller smartport_work_mode controller=0A mode=FC
DANGER:You are about to modify the work mode of the smart ports on the controller.This operation will interrupt the services of all smart ports on the controller.
Suggestion:1. Before you perform this operation, ensure that the services of all smart ports on the controller are stopped.2. After performing this operation, create a new network based on the current work mode of the smart ports on the controller.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 363946

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next