No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_copy session

change lun_copy session

Function

The change lun_copy session command is used to start, pause, continue, or stop LUN copy tasks.

Format

change lun_copy session lun_copy_id=? operation=?

Parameters

Parameter

Description

Value

lun_copy_id=? ID of a LUN copy task.

To obtain the value, run "show lun_copy general".

operation=? The action to be performed for a LUN copy task.

The value can be "start", "stop", "pause", or "continue", where:

  • "start": A LUN copy task will be started.
  • "stop": A LUN copy task will be stopped.
  • "pause": A LUN copy task will be paused.
  • "continue": A LUN copy task will be resumed. The progress of a paused LUN copy task will be retained by the storage system.

Level

Administrator

Usage Guidelines

None

Example

None

admin:/>change lun_copy session lun_copy_id=0 operation=start
DANGER: You are about to copy the data from source LUN to target LUN. After this operation, data on the target LUN will be overwritten by the data on the source LUN.
Suggestion: Before performing this operation, ensure that:
1. All services on the source LUN and target LUN have been stopped. If services have not been stopped, data on the target LUN may become unavailable.
2. The information about the LUN copy is correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 367289

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next