No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove domain ad_config

remove domain ad_config


The remove domain ad_config command is used to clear AD domain configuration such as cluster names, domain controller names, organization units, and site names.


remove domain ad_config [ parameter_name=? ]





parameter_name=? The AD domain configuration that needs to be cleared.

The value can be "cluster_name", "domain_name", "organization_unit", or "sitename", where:

  • cluster_name: to clear cluster names.
  • domain_name: to clear domain controller names.
  • organization_unit: to clear organization units.
  • sitename: to clear site names.
You can choose one or multiple values.



Usage Guidelines

If you run this command without the "parameter_name" parameter, cluster names, domain controller names, organization units, and site names will all be cleared.


To clear system names, domain controller names, organization units, and site names, run the following command:

admin:/>remove domain ad_config parameter_name=cluster_name,domain_name,organization_unit,site_name
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 366831

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next