No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication general

show remote_replication general

Function

The show remote_replication general command is used to query the information on remote replication tasks.

Format

show remote_replication general [ remote_replication_id=? ]

Parameters

Parameter

Description

Value

remote_replication_id=? ID of a remote replication task.

To obtain the value, run "show remote_replication general" without parameters.

Level

Guest

Usage Guidelines

  • To query the basic information on existing remote replication tasks, run "show remote_replication general".
  • To query the detailed information on a specific remote replication task, run "show remote_replication general remote_replication_id=?".

Example

  • To query the basic information on existing remote replication tasks.

      admin:/>show remote_replication general 
      ID                Health Status  Running Status  Is Primary  Replication Mode  Compress Enable  Compress Valid  Time Difference  
      ----------------  -------------  --------------  ----------  ----------------  ---------------  --------------  ---------------  
      74a063f95e340004  Normal         Normal          Yes         Asynchronous      No               No                     00:25:59  
      74a063f95e340007  Normal         Normal          Yes         Asynchronous      No               No                     00:25:59 
  • To query the detailed information on remote replication task "74a063f95e340004".

    admin:/>show remote_replication general remote_replication_id=74a063f95e340004
    ID: 74a063f95e340004
    Health Status: Normal
    Running Status: Normal
    Is Primary: Yes
    Local LUN ID: 31
    Local LUN Name: LUN_3dc_c10000
    Remote Device ID: 1
    Remote Device SN: 2102350BSJ2583012525
    Remote Device Name: Huawei.Storage
    Remote LUN ID: 14
    Remote LUN Name: LUN_3dcc20000
    Primary LUN Capacity: 16.000GB
    Synchronization Type: Manual
    Recovery Policy: Automatic
    Replication Mode: Asynchronous
    Progress(%): 100
    Start Time: 2016-04-19/16:00:33 UTC+08:00
    End Time: 2016-04-19/16:00:33 UTC+08:00
    Rate: Middle
    Timing Length: --
    Primary LUN Data Status : Consistent
    Second LUN Data Status: Consistent
    Second LUN Access: Read Only
    Is Restore: No
    Is In Consistency Group : Yes
    Consistency Group ID: 74a063f95e34000c
    Consistency Group Name: ConsistentGroup013
    Is Data Sync: Yes
    Compress Enable: No
    Compress Valid: No
    Remote I/O Timeout Period(s) : -- 
    Time Difference: 00:26:10

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Remote replication ID.

Health Status

Health status.

Running Status

Running status.

Is Primary

Is primary of the remote replication.

Local LUN ID

Primary LUN ID.

Local LUN Name

Primary LUN name.

Remote Device ID

Remote device ID.

Remote Device SN

Serial number of remote device.

Remote Device Name

Remote device name.

Remote LUN ID

Remote LUN ID.

Remote LUN Name

Remote LUN name.

Primary LUN Capacity

Primary LUN capacity.

Synchronization Type

Synchronization type.

Recovery Policy

Recovery policy.

Replication Mode

Remote replication mode.

Progress

Progress of remote replication.

Start Time

Start time of synchronizing.

End Time

End time of synchronizing.

Rate

Synchronization rate of remote replication.

Timing Length

Timing period (data synchronization period).

Primary LUN Data Status

Primary LUN data status.

Second LUN Data Status

Second LUN data status.

Second LUN Access

Second LUN access.

Is Restore

Is the second LUN of remote replication restore.

Is In Consistency Group

Is the remote replication in consistency group.

Consistency Group ID

Consistency group id of this remote replication.

Consistency Group Name

Consistency group name of this remote replication.

Is Data Sync

Is Data synchronizing between primary lun and second lun.

Compress Enable

Is compression enabled.

Compress Valid

Is compression valid.

Remote I/O Timeout Period(s)

Remote I/O Timeout Period(s).

Time Difference

Time difference between the data synchronization points in time of the primary and secondary resources in a synchronization period of asynchronous remote replication.

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084195

Views: 368110

Downloads: 1594

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next