No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Basic Storage Service Guide for File 15

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R003

"This document describes the basic storage services and explains how to configure and managebasic storage services."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Logical Port Details

Viewing Logical Port Details

This operation enables you to view the information such as ID, name, running status, status, IPv4 address, IPv6 address, and current port of a logical port.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Logical Ports.
  3. View logical port information. The related parameters are described in Table 5-15.



    Table 5-15  Logical port parameters

    Parameter

    Description

    Value

    ID

    ID of the logical port.

    [Example]

    4278321152

    Name

    Name of the logical port.

    The name must meet the following requirements so that the logical port is available to compatible applications:
    • The name must be unique.
    • The name can contain only letters, digits, underscores (_), periods (.), and hyphens (-).
    • The name contains 1 to 31 characters.

    [Example]

    Lif01

    Running Status

    Operating status of the logical port to which the logical port belongs.

    [Example]

    Link up

    Status

    Operating status of the logical port.

    [Example]

    Active

    IPv4 Address

    IPv4 address of the logical port.

    [Example]

    192.168.100.11

    IPv6 Address

    IPv6 address of the logical port.

    [Example]

    None

    Primary Port

    Port to which the logical port belongs, including the Ethernet port, bond port, and VLAN.
    NOTE:

    If the primary port fails, services are failed over to other normal ports within the group by default.

    [Example]

    CTE0.A.H0

    Current Port

    The current port to which the logical port belongs.

    [Example]

    CTE0.A.H0

Translation
Download
Updated: 2019-02-01

Document ID: EDOC1000084198

Views: 39590

Downloads: 827

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next